High Capacity Input Tray (Hcit) Cover, Left Removal - Dell 5535dn Service Manual

High capacity input tray (HCIT) cover, left removal

Note: Carefully remove the base machine from the HCIT tray assembly before proceeding.
Note: Before removing the HCIT cover, left, first remove the left side anti-tip latch assembly. See "High
capacity input tray (HCIT) anti-tip latch assembly removal" on page 4-165.
1. Remove the HCIT cover, rear. See "High capacity input tray (HCIT) cover, rear removal" on
page 4-160.
2. Remove the six screws (A) securing the HCIT cover, left to the drawer.
3. Use a screwdriver to gently pry up on the tabs (B).
B
4-164
Service Manual
A
A