Dell 5535dn Service Manual page 170

Step
7 Perform a print test and check the duplex drive motor
assembly for proper operation.
Does the above component operate properly?
8 Check the sensor (duplex input) for proper operation.
1. Enter the diagnostic mode
2. Select Duplex tests
3. Select sensor test
4. Observe the line item "input"
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.
9 Check the above sensor for proper connection.
Is the above sensor connected properly?
10 Perform a print test and check the duplex drive motor
assembly for proper operation.
Does the above component operate properly?
11 Check the external duplex media path for obstructions.
Is the above component free from obstructions?
12 Check the external duplex unit assembly for proper
installation.
Is the above component properly installed?
13 Check the sensor (duplex input) for proper operation.
1. Enter the diagnostic mode
2. Select Duplex tests
3. Select sensor test
3. Observe the line item "input"
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.
14 Perform a print test using the duplex.
Does the problem remain?
2-138
Service Manual
Check Yes
Go to step 8 Replace the
duplex drive motor
assembly.
Go to "Duplex
drive motor
assembly
removal" on
page 4-9.
Go to step 10. Go to step 9.
Replace the Replace the
Sensor (duplex connection.
input).
Go to "Sensor
(duplex input)
removal" on
page 4-41.
Go to step 14. Replace the
duplex drive motor
assembly.
Go to "Duplex
drive motor
assembly
removal" on
page 4-9.
Go to step 12 Remove
obstructions.
Go to step 13. Remove then
properly re-install
the external
duplex unit
assembly.
Go to step 14. Replace the
external duplex
assembly.
Contact next Problem solved.
highest level of
tech support.
No