Dell 5535dn Service Manual page 110

Error
code or
message
906.xx
910.00
911.00
912.00
913.00
2-78
Service Manual
Error contents
RIP interface driver
error
Pick arm motor stalled
failure
Pick arm motor
overrun failure
Pick arm motor
underspeed failure
Pick arm motor
overspeed failure
Description/Action
Code detected unusual event
or timing.
The pick arm motor has stalled
or become obstructed.
The pick arm motor encoder
continues to detect pulse after
the motor stops.
The pick arm motor does not
rotate at the specified speed.
The pick arm motor does not
rotate at the specified speed.
Possible repair actions
1. POR the machine and print
a simple test page to
determine if the problem is
system software related, or
if the customer is sending a
corrupted print job.
2. Check all connections on
the system card assembly.
3. Replace the system card
assembly if problem
remains. Go to "System
card assembly removal"
on page 4-50.
1. Check all the connections on
the pick arm assembly.
2. Check all the connections on
the system card assembly.
3. Replace the pick arm
assembly if problem remains.
Go to "Pick arm assembly
removal" on page 4-29.
1. Check all the connections on
the pick arm assembly.
2. Check all the connections on
the system card assembly.
3. Replace the pick arm
assembly if problem remains.
Go to "Pick arm assembly
removal" on page 4-29.
1. Check all the connections on
the pick arm assembly.
2. Check all the connections on
the system card assembly.
3. Replace the pick arm
assembly if problem remains.
Go to "Pick arm assembly
removal" on page 4-29.
1. Check all the connections on
the pick arm assembly.
2. Check all the connections on
the system card assembly.
3. Replace the pick arm
assembly if problem remains.
Go to "Pick arm assembly
removal" on page 4-29.