Dell 5535dn Service Manual page 39

Error
code or Error contents
message
54B Std Network Software
Error
54C Network [x] Software
Error
55B Unsupported Option
in Slot [x]
56A Parallel Port [x]
Disabled
56B Serial Port [x]
Disabled
56C Standard USB Port
Disabled
Description/Action
This error displays when a
network port is detected, but
the printer cannot establish
communications with it.
This error displays when a
network port is detected, but
the printer cannot establish
communications with it.
An unsupported option is
installed in the specified
solutions port. Power off the
printer and remove the
unsupported option in the
specified slot.
This error displays when data
is sent to the printer across an
optional parallel port, but the
port has been disabled. Once
this message displays,
reporting of further errors is
suppressed until the menus are
entered, or the printer is reset.
This error displays when data
is sent to the printer across an
serial port, but the port has
been disabled. Once this
message displays, reporting of
further errors is suppressed
until the menus are entered, or
the printer is reset.
Displayed when status is
requested over the USB port,
but the port has been disabled.
Once the error has been
displayed for the first time,
reporting of further errors is
suppressed until the menus are
entered or the printer is reset.
Possible repair actions
The following actions may be
taken:
• Press to clear the
message and continue
printing.
The job may not print
correctly.
• Program new firmware for
the network interface.
Reset the printer.
The following actions may be
taken:
• Press to clear the
message and continue
printing.
The job may not print
correctly.
• Program new firmware for
the network interface.
• Reset the printer.
Remove unsupported option.
Go to network service check.
See "ADF & Scanner Related
Troubleshooting" on
page 2-171.
Go to network service check.
See "ADF & Scanner Related
Troubleshooting" on
page 2-171.
The following actions may be
taken:
• Press to clear the
message. The printer
discards any data received
on the USB port.
• Press until Busy/
Waiting appears. The
following are available:
- Reset Printer
Reset Active Bin
Diagnostic information
2-7