Dell 5535dn Service Manual page 104

Error
code or
message
28x.61
x = bin
number
28x.62
x = bin
number
28x.63
x = bin
number
28x.64
x = bin
number
28x.65
x = bin
number
28x.66
x = bin
number
28x.67
x = bin
number
2-72
Service Manual
Error contents
DMID command is not
received for 500ms
after main motor runs
Applies to:
StapleSmart finisher
When finishing job
isn't completed yet,
the first DMID
command of the next
job is received.
Applies to:
StapleSmart finisher
Bin clamp motor
control timer error.
Applies to:
StapleSmart finisher
Bin clamp motor
control timer error
during tray holder
initial.
Applies to:
StapleSmart finisher
Bin clamp home
position jam
Applies to:
StapleSmart finisher
Bin clamp home
position jam
Applies to:
StapleSmart finisher
Invalid bin clamp
manager state.
Applies to:
StapleSmart finisher
Description/Action
A software failure has occurred
with the output option.
A software failure has occurred
with the output option.
A software failure has occurred
with the output option.
A software failure has occurred
with the output option.
The bin clamp home position is
not detected by the sensor (bin
clamp HP)
The sensor (bin clamp HP)
does not detect that the bin
clamp has moved from home
position.
A software failure has occurred
with the output option.
Possible repair actions
1. Turn the machine off/on.
2. Replace the output option if
problem remains.
1. Turn the machine off/on.
2. Replace the output option if
problem remains.
1. Turn the machine off/on.
2. Replace the output option if
problem remains.
1. Turn the machine off/on.
2. Replace the output option if
problem remains.
1. Turn the machine off/on.
2. Replace the output option if
problem remains.
1. Turn the machine off/on.
2. Replace the output option if
problem remains.
1. Turn the machine off/on.
2. Replace the output option if
problem remains.