Step
6
Check the heat roll and pressure roll.
Remove the fuser unit assembly.
Is there contamination or cracks on the heat roll and/or
pressure roll?
7
Check the HVPS card assembly for proper connection.
Is the above component properly connected?
8
Perform a print test.
Does the problem remain?
Check
CAUTION: : Allow
the fuser unit
assembly to cool
down.
Yes
Replace the
Go to step 7.
fuser unit
assembly.
Go to "Fuser
unit assembly
removal" on
page 4-15.
Replace the
Replace the
HVPS card
connections.
assembly.
Go to "HVPS
card assembly
removal" on
page 4-17.
Contact next
Problem solved.
highest level of
tech support.
Diagnostic information
No
2-161