4-bin mailbox assembly right cover removal
1. Place the 4-bin mailbox assembly on its side.
2. Remove the two screws (A) from the bottom side of the right cover securing cover in place.
A
3. Using your fingers, pull up on the top of the right cover and pull out simultaneously to remove.
4-bin mailbox assembly LED card assembly removal
1. Remove the 4-bin mailbox assembly right cover. See "4-bin mailbox assembly right cover removal" on
page 4-225.
2. Disconnect the 3 wire harnesses attached to the LED card assembly.
A
4-225
Repair information