Vertical Stripes (Process Direction) - Dell 5535dn Service Manual

Vertical stripes (process direction)

Leading edge
Trailing edge
Step
1 Check the media condition.
Load new, dry, recommended media.
Re-print the defective image.
Does the error continue?
2 Are the media transfer route and the media path free of
contamination or debris?
3 Check the charge roll assembly for contamination and
wear.
Is the above component free of excess wear and
contamination?
4 Check the transfer roll assembly for contamination and
wear.
Is the above component free of excess wear and
contamination?
5 Check the print cartridge for proper installation.
Is the above component properly installed?
6 Check the heat roll and pressure roll.
Remove the fuser unit assembly.
Is there contamination or cracks on the heat roll and/or
pressure roll?
Check
CAUTION: : Allow
the fuser unit
assembly to cool
down.
Yes
Go to step 2. Problem solved.
Go to step 3. Remove debris
or
contamination.
Go to step 4. Replace the
charge roll
assembly.
Go to "Charge
roll assembly
removal" on
page 4-6.
Go to step 5. Replace the
transfer roll
assembly.
Go to "Transfer
roll assembly
removal" on
page 4-56.
Go to step 6. Inspect, clean
and reinstall
replace the print
cartridge.
Replace the Go to step 7.
fuser unit
assembly.
Go to "Fuser
unit assembly
removal" on
page 4-15.
Diagnostic information
No
2-159