THORLABS DCU223x Operation Manual And Sdk page 88

DCx Cameras
model is opened the next time.
Restore window position and size
If you select this check box, the size and position of the program window will be restored when uc480 Viewer is
launched the next time.
Show image info window
If you select this check box, the
Show log window
If you select this check box, the
3.4.2.6.3 Histogram
Select the menu View > Histogram
frequency distribution of the color values in the image captured by the camera.
For more information on histograms see the
The histogram always displays 256 values per channel. For color modes with a bit depth of more than 8 bits, the
function evaluates the 8 most significant bits (MSBs).
The following options are available:
Channel
With the "Red", "Green", and "Blue" check boxes, you can enable or disable the display for each color channel.
Avg. displays the average of each color value.
For monochrome images, the average grayscale value is displayed.
Outlined
The "Outlined" check box enables you to toggle the color value display between an area diagram and a line
diagram.
Logarithmic
If you select this check box, the values are displayed with logarithmic scaling.
Show Bayer RGB
This function is only available when a color camera is running in "Direct raw Bayer" mode. If you select this check
box, the histogram represents the individual Bayer color components as red, green and blue channels.
86
Image infos window will be opened on program start.
90
Log window will be opened on program start.
89
to open the "Histogram" window. This window graphically displays the
80
Bit depth and digital contrast adjustment chapter.
41
© 2013 Thorlabs GmbH