THORLABS DCU223x Operation Manual And Sdk page 336

DCx Cameras
hCam
nBlue
IS_IGNORE_PARAMETER
Return values
When used with
IS_GET_MASTER_GAIN
IS_GET_RED_GAIN
IS_GET_GREEN_GAIN
IS_GET_BLUE_GAIN
IS_CANT_COMMUNICATE_WITH_DRIVER
IS_CANT_OPEN_DEVICE
IS_INVALID_CAMERA_TYPE
IS_INVALID_CAMERA_HANDLE
IS_INVALID_MODE
IS_INVALID_PARAMETER
IS_IO_REQUEST_FAILED
IS_NO_SUCCESS
IS_NOT_CALIBRATED
IS_NOT_SUPPORTED
IS_NULL_POINTER
IS_SUCCESS
IS_TIMED_OUT
Related functions
is_SetHWGainFactor()
is_GetSensorInfo()
is_SetGainBoost()
is_SetAutoParameter()
334
Current setting
Communication with the driver failed because no driver has been
loaded.
An attempt to initialize or select the camera failed (no camera
connected or initialization error).
The camera type defined in the .ini file does not match the current
camera model.
Invalid camera handle
Camera is in standby mode, function not allowed
One of the submitted parameters is outside the valid range or is not
supported for this sensor or is not available in this mode.
An IO request from the uc480 driver failed. Possibly the versions of
the uc480_api.dll (API) and the driver file (uc480_usb.sys) do
not match.
General error message
The camera does not contain any calibration data.
The camera model used here does not support this function or
setting.
Invalid array
Function executed successfully
A timeout occurred. An image capturing process could not be
terminated within the allowable period.
335
251
331
303
Camera handle
Sets the blue channel gain factor (0...100).
The blue channel gain factor will not be changed.
© 2013 Thorlabs GmbH