THORLABS DCU223x Operation Manual And Sdk page 192

DCx Cameras
4.3.13 is_CopyImageMem
USB 2.0
USB 3.0
Syntax
INT is_CopyImageMem (HIDS hCam, char* pcSource, INT nID, char* pcDest)
Description
is_CopyImageMem() copies the contents of the image memory described by pcSource and nID to the memory
area to whose starting address pcDest points.
Attention
The allocated memory must be large enough to accommodate the entire image in its current format (bits per
pixel).
Input parameters
hCam
pcSource
nID
pcDest
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
IS_CANT_OPEN_DEVICE
IS_INVALID_CAMERA_HANDLE
IS_INVALID_MEMORY_POINTER
IS_INVALID_PARAMETER
IS_IO_REQUEST_FAILED
IS_NO_SUCCESS
IS_SUCCESS
Related functions
is_AllocImageMem()
is_SetAllocatedImageMem()
190
USB 2.0
USB 3.0
157
301
Camera handle
Pointer to the image memory
ID of this image memory
Pointer to the destination memory to copy the image to
Communication with the driver failed because no driver
has been loaded.
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
Invalid camera handle
Invalid pointer or invalid memory ID
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
General error message
Function executed successfully
© 2013 Thorlabs GmbH