Is_Getexposurerange - THORLABS DCU223x Operation Manual And Sdk

DCx Cameras

4.5.8 is_GetExposureRange

USB 2.0
Syntax
INT is_GetExposureRange (HIDS hCam, double* min,double* max, double* intervall)
Description
Attention
This function is obsolete and should not be used anymore. We recommend to use the
function instead (see also
Using is_GetExposureRange(), you can query the exposure values (in milliseconds) available for the currently
selected timing (pixel clock, frame rate). The available time values are comprised between min and max and can
be set in increments defined by the intervall parameter.
Attention
The increments for setting the exposure time (intervall) depend on the sensor's current timing settings (pixel
clock, frame rate). The smallest increment always corresponds to the duration of one pixel row, which is the time it
takes the sensor to read out one pixel row.
Input parameters
hCam
min
max
intervall
Return values
IS_SUCCESS
IS_NO_SUCCESS
Related functions
is_SetExposureTime()
is_PixelClock()
is_GetFrameTimeRange()
is_GetFramesPerSecond()
is_SetFrameRate()
390
USB 2.0
Obsolete functions
379
427
294
241
240
329
).
Camera handle
Returns the minimum available exposure time.
Returns the maximum available exposure time.
Returns the increment you can use to change the image
exposure time.
Function executed successfully
General error message
is_Exposure()
© 2013 Thorlabs GmbH
216