Is_Setimagemem - THORLABS DCU223x Operation Manual And Sdk

4.3.89 is_SetImageMem

USB 2.0
USB 3.0
Syntax
INT is_SetImageMem (HIDS hCam, char* pcImgMem, INT id)
Description
is_SetImageMem() makes the specified image memory the active memory. Only an active image memory can
receive image data. When you call
designated by pcImgMem and id. For pcImgMem, you must pass a pointer which was created by
is_AllocImageMem()
pointer multiple times.
Notes
In the Direct3D or OpenGL modes, there is no need to set an image memory.
If you want the application to be compatible with the FALCON SDK, make sure to call
after is_SetImageMem().
438
Input parameters
hCam
pcImgMem
id
Return values
IS_INVALID_CAMERA_HANDLE
IS_NO_SUCCESS
IS_SUCCESS
Related functions
is_AllocImageMem()
is_FreeImageMem()
is_AddToSequence()
is_SetAllocatedImageMem()
is_GetColorDepth()
is_GetImageMem()
is_GetImageMemPitch()
© 2013 Thorlabs GmbH
USB 2.0
USB 3.0
is_FreezeVideo()
, passing any other pointer will result in an error message. You may pass the same
157
157
222
156
301
237
247
248
, the captured image is stored in the image buffer
223
Camera handle
Pointer to the starting position in the memory.
ID of this memory.
Invalid camera handle
General error message
Function executed successfully
4 Programming (SDK)
is_SetImageSize()
337