THORLABS DCU223x Operation Manual And Sdk page 175

Return values
Only if ulValue = IS_GET_STATUS
When used with
IS_LAST_CAPTURE_ERROR
IS_BAD_STRUCTURE_SIZE
IS_CANT_COMMUNICATE_WITH_DRIVE
R
IS_CANT_OPEN_DEVICE
IS_INVALID_CAMERA_TYPE
IS_INVALID_EXPOSURE_TIME
IS_INVALID_CAMERA_HANDLE
IS_INVALID_PARAMETER
IS_IO_REQUEST_FAILED
IS_NO_SUCCESS
IS_NOT_CALIBRATED
IS_NOT_SUPPORTED
IS_OUT_OF_MEMORY
IS_SUCCESS
IS_TIMED_OUT
Related functions
is_GetCameraInfo()
is_GetError()
239
is_SetErrorReport()
is_SetTriggerCounter()
© 2013 Thorlabs GmbH
Returns the information specified by nInfo
Returns the last image capture error. For a list of all possible error
events, see
An internal structure has an incorrect size.
Communication with the driver failed because no driver has been
loaded.
An attempt to initialize or select the camera failed (no camera
connected or initialization error).
The camera type defined in the .ini file does not match the current
camera model.
This setting is not available for the currently set exposure time.
Invalid camera handle
One of the submitted parameters is outside the valid range or is not
supported for this sensor or is not available in this mode.
An IO request from the uc480 driver failed. Possibly the versions of the
uc480_api.dll (API) and the driver file (uc480_usb.sys) do not
match.
General error message
The camera does not contain any calibration data.
The camera model used here does not support this function or setting.
No memory could be allocated.
Function executed successfully
A timeout occurred. An image capturing process could not be
terminated within the allowable period.
231
326
351
is_GetCaptureErrorInfo()
4 Programming (SDK)
.
386
173