4.3.54 is_GetUsedBandwidth
USB 2.0
USB 3.0
Syntax
INT is_GetUsedBandwidth (HIDS hCam)
Description
is_GetUsedBandwidth() returns the bus bandwidth (in MByte/s) currently used by all initialized or selected
cameras. This is an approximate value which is calculated based on the pixel clock that has been set and the data
format (bits per pixel). The actual data load on the bus can slightly deviate from this value.
Input parameters
hCam
Return values
INT value
Related functions
is_PixelClock()
© 2013 Thorlabs GmbH
USB 2.0
USB 3.0
294
Camera handle
The total current bus bandwidth (in MByte/s)
4 Programming (SDK)
257