Is_Getautoinfo - THORLABS DCU223x Operation Manual And Sdk

4.3.32 is_GetAutoInfo

USB 2.0
USB 3.0
Syntax
INT is_GetAutoInfo (HIDS hCam, UC480_AUTO_INFO* pInfo)
Description
Using the is_GetAutoInfo() function, you can query status information on the automatic image control
features. This information is written to the UC480_AUTO_INFO structure.
For further information on automatic control, please refer to the
Attention
The status information returned in the UC480_AUTO_INFO structure is only valid if at least one of the auto control
feature has been enabled using
Input parameters
hCam
pinfo
Contents of the UC480_AUTO_INFO Structure
INT
AUTO_BRIGHT_STATUS
AUTO_WB_STATUS
DWORD
DWORD
DWORD
DWORD
© 2013 Thorlabs GmbH
USB 2.0
USB 3.0
is_SetAutoParameter()
AutoAbility
AC_SHUTTER
AC_SENSOR_SHUTTER
AC_FRAMERATE
AC_SENSOR_FRAMERATE
AC_GAIN
AC_SENSOR_GAIN
AC_SENSOR_AUTO_
CONTRAST_CORRECTION
AC_SENSOR_AUTO_
CONTRAST_FDT_AOI
AC_SENSOR_AUTO_
BACKLIGHT_COMP
AC_WHITEBAL
AC_SENSOR_WB
sBrightCtrlStatus
sWBCtrlStatus
AShutterPhotomCaps
AGainPhotomCaps
AAntiFlickerCaps
SensorWBModeCaps
Automatic image control
.
303
Camera handle
UC480_AUTO_INFO structure (see below)
Supported auto control features
Auto exposure shutter is supported
The sensor's internal auto exposure shutter is
supported
Auto frame rate is supported
The sensor's internal auto frame rate is supported
Auto gain control is supported
The sensor's internal auto gain control is
supported
Auto contrast correction for automatic brightness
control is supported
Use of face detection as field of view for automatic
brightness control is supported
Backlight compensation for automatic brightness
control is supported
Auto white balance is supported
The sensor's internal auto white balance is
supported
Status of automatic brightness control, see below
Status of auto white balance, see below
Returns a bit mask containing all supported
photometry settings (fields of view) for auto
exposure shutter, see below.
Returns a bit mask containing all supported
photometry settings (fields of view) for auto gain
control, see below.
Returns a bit mask containing all supported anti
flicker settings for automatic control, see below.
Returns a bit mask containing all supported
settings for the sensor's auto white balance, see
4 Programming (SDK)
chapter.
45
227