Is_Devicefeature - THORLABS DCU223x Operation Manual And Sdk

DCx Cameras

4.3.15 is_DeviceFeature

USB 2.0
USB 3.0
Note
This command is supported by DCC1240x / DCC3240x cameras only!
Syntax
INT is_DeviceFeature (HIDS hCam, UINT nCommand, void* pParam, UINT cbSizeOfParam)
Description
Using is_DeviceFeature() you can configure special camera functions provided by DCC1240x / DCC3240x
Camera models:
Set line scan mode, see
Toggle between shutter modes, see
Control the Log mode, see
The nCommand input parameter is used to select the function mode. The pParam input parameter depends on the
selected function mode. If you select functions for setting or returning a value, pParam contains a pointer to a
variable of the UINT type. The size of the memory area to which pParam refers is specified in the
cbSizeOfParam input parameter.
Input parameters
hCam
nCommand
IS_DEVICE_FEATURE_CMD_GET_SUPPORTED_FEAT
URES
IS_DEVICE_FEATURE_CMD_SET_LINESCAN_MODE
IS_DEVICE_FEATURE_CMD_GET_LINESCAN_MODE
IS_DEVICE_FEATURE_CMD_SET_LINESCAN_NUMBE
R
IS_DEVICE_FEATURE_CMD_GET_LINESCAN_NUMBE
R
IS_DEVICE_FEATURE_CMD_SET_SHUTTER_MODE
IS_DEVICE_FEATURE_CMD_GET_SHUTTER_MODE
IS_DEVICE_FEATURE_CMD_GET_LOG_MODE_DEFAU
LT
IS_DEVICE_FEATURE_CMD_GET_LOG_MODE
IS_DEVICE_FEATURE_CMD_SET_LOG_MODE
IS_DEVICE_FEATURE_CMD_GET_LOG_MODE_MANUA
L_VALUE_DEFAULT
IS_DEVICE_FEATURE_CMD_GET_LOG_MODE_MANUA
L_VALUE_RANGE
IS_DEVICE_FEATURE_CMD_GET_LOG_MODE_MANUA
L_VALUE
IS_DEVICE_FEATURE_CMD_SET_LOG_MODE_MANUA
L_VALUE
192
USB 2.0
USB 3.0
Basics: Line scan mode
Basics: Shutter methods.
uc480 Viewer: Shutter.
(only monochrome models).
33
30
116
Camera handle
Returns the functions supported by the camera. See
Status flags table
193
Sets the line scan mode, see
DEVICE_FEATURE_MODE_CAPS
Returns the currently set line scan mode
Sets the scan line used for the line scan mode
Returns the scan line used for the line scan mode
Sets the shutter mode, see
DEVICE_FEATURE_MODE_CAPS
Returns the shutter mode
Returns the default settings for the Log mode
)
194
Returns the currect Log mode
Sets the Log mode
Returns the default settings for the manual value of the
Log mode (Example 4
Returns the range of the manual value of the Log mode.
Returns the current manual value of the Log mode
(Example 5 )
195
Sets the manual value of the Log mode
(Example 1 )
194
(Example 3
194
)
195
© 2013 Thorlabs GmbH
(Example 2
)