Lists; Complete List Of All Return Values - THORLABS DCU223x Operation Manual And Sdk

DCx Cameras

4.7 Lists

Complete list of all return values

Error codes of AVI functions
Linux: not supported functions
4.7.1 Complete List of All Return Values
No Error
-1 IS_NO_SUCCESS
IS_SUCCESS
0
1 IS_INVALID_CAMERA_HANDLE
2 IS_IO_REQUEST_FAILED
3 IS_CANT_OPEN_DEVICE
IS_CANT_OPEN_REGISTRY
11
12 IS_CANT_READ_REGISTRY
15 IS_NO_IMAGE_MEM_ALLOCATED
16 IS_CANT_CLEANUP_MEMORY
IS_CANT_COMMUNICATE_WITH_DRIVER
17
18 IS_FUNCTION_NOT_SUPPORTED_YET
32 IS_INVALID_CAPTURE_MODE
49 IS_INVALID_MEMORY_POINTER
50 IS_FILE_WRITE_OPEN_ERROR
IS_FILEREAD_OPEN_ERROR
51
52 IS_FILE_READ_INVALID_BMP_ID
53 IS_FILE_READ_INVALID_BMP_SIZE
IS_NO_ACTIVE_IMG_MEM
108
112 IS_SEQUENCE_LIST_EMPTY
IS_CANT_ADD_TO_SEQUENCE
113
IS_SEQUENCE_BUF_ALREADY_LOCKED
117
118 IS_INVALID_DEVICE_ID
119 IS_INVALID_BOARD_ID
120 IS_ALL_DEVICES_BUSY
IS_TIMED_OUT
122
IS_NULL_POINTER
123
454
454
457
457
Description
General error message
Function executed successfully
Invalid camera handle
Most of the uc480 SDK functions expect the
camera handle as the first parameter.
An IO request from the uc480 driver failed. Possibly
the versions of the uc480_api.dll (API) and the
driver file (uc480_usb.sys) do not match.
An attempt to initialize or select the camera failed
(no camera connected or initialization error).
Error opening a Windows registry key
Error reading settings from the Windows registry
The driver could not allocate memory.
The driver could not release the allocated memory.
Communication with the driver failed because no
driver has been loaded.
The function is not supported yet.
The function can not be executed in the current
camera operating mode (free run, trigger or
standby).
Invalid pointer or invalid memory ID
File cannot be opened for writing or reading.
The file cannot be opened.
The specified file is not a valid bitmap file.
The bitmap size is not correct (bitmap too large).
No active image memory available. You must set
the memory to active using the is_SetImageMem
() function or create a sequence using the
is_AddToSequence() function.
The sequence list is empty and cannot be deleted.
The image memory is already included in the
sequence and cannot be added again.
The memory could not be locked. The pointer to the
buffer is invalid.
The device ID is invalid. Valid IDs start from 1 for
USB cameras, and from 1001 for GigE cameras.
The board ID is invalid. Valid IDs range from 1
through 255.
All cameras are in use.
A timeout occurred. An image capturing process
could not be terminated within the allowable period.
Invalid array
© 2013 Thorlabs GmbH