Is_Setcameraid - THORLABS DCU223x Operation Manual And Sdk

4.3.76 is_SetCameraID

USB 2.0
USB 3.0
Syntax
INT is_SetCameraID (HIDS hCam, INT nID)
Description
Using is_SetCameraID(), you can assign a unique camera ID to a camera. Thus, it is possible to access the
camera directly with the
The camera ID is stored in the non-volatile memory of the camera. The factory default camera ID is 1. The camera
ID can also be changed in the uc480 Camera Manager.
Input parameters
hCam
nID
1...254
IS_GET_CAMERA_ID
Return values
When used together with
IS_GET_CAMERA_ID
IS_ACCESS_VIOLATION
IS_CANT_COMMUNICATE_WITH_DRIVER
IS_CANT_OPEN_DEVICE
IS_INVALID_CAMERA_TYPE
IS_INVALID_CAMERA_HANDLE
IS_INVALID_MODE
IS_INVALID_PARAMETER
IS_IO_REQUEST_FAILED
IS_NO_SUCCESS
IS_NOT_CALIBRATED
IS_NOT_SUPPORTED
IS_NULL_POINTER
IS_SUCCESS
IS_TIMED_OUT
Related functions
is_InitCamera()
© 2013 Thorlabs GmbH
USB 2.0
USB 3.0
is_InitCamera()
273
273
function.
Camera handle
New camera ID
Returns the current ID.
Current ID
An internal error has occured.
The camera ID cannot be changed because the camera
is running in the boot-boost mode.
Communication with the driver failed because no driver
has been loaded.
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
The camera type defined in the .ini file does not match
the current camera model.
Invalid camera handle
Camera is in standby mode, function not allowed
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
General error message
The camera does not contain any calibration data.
The camera model used here does not support this
function or setting.
Invalid array
Function executed successfully
A timeout occurred. An image capturing process could
not be terminated within the allowable period.
4 Programming (SDK)
313