THORLABS DCU223x Operation Manual And Sdk page 457

No Error
IS_INVALID_PARAMETER
125
IS_OUT_OF_MEMORY
127
129 IS_ACCESS_VIOLATION
139 IS_NO_USB20
IS_CAPTURE_RUNNING
140
145 IS_IMAGE_NOT_PRESENT
148 IS_TRIGGER_ACTIVATED
151 IS_CRC_ERROR
152 IS_NOT_YET_RELEASED
153 IS_NOT_CALIBRATED
IS_WAITING_FOR_KERNEL
154
155 IS_NOT_SUPPORTED
156 IS_TRIGGER_NOT_ACTIVATED
157 IS_OPERATION_ABORTED
158 IS_BAD_STRUCTURE_SIZE
IS_INVALID_BUFFER_SIZE
159
160 IS_INVALID_PIXEL_CLOCK
161 IS_INVALID_EXPOSURE_TIME
162 IS_AUTO_EXPOSURE_RUNNING
163 IS_CANNOT_CREATE_BB_SURF
IS_CANNOT_CREATE_BB_MIX
164
165 IS_BB_OVLMEM_NULL
166 IS_CANNOT_CREATE_BB_OVL
IS_NOT_SUPP_IN_OVL_SURF_MODE
167
IS_INVALID_SURFACE
168
169 IS_SURFACE_LOST
170 IS_RELEASE_BB_OVL_DC
IS_BB_TIMER_NOT_CREATED
171
172 IS_BB_OVL_NOT_EN
173 IS_ONLY_IN_BB_MODE
IS_INVALID_COLOR_FORMAT
174
175 IS_INVALID_WB_BINNING_MODE
© 2013 Thorlabs GmbH
Description
One of the submitted parameters is outside the
valid range or is not supported for this sensor or is
not available in this mode.
No memory could be allocated.
An internal error has occured.
The camera is connected to a port which does not
support the USB 2.0 high-speed standard.
Cameras without a memory board cannot be
operated on a USB 1.1 port.
A capturing operation is in progress and must be
terminated before you can start another one.
The requested image is not available in the camera
memory or is no longer valid.
The function cannot be used because the camera is
waiting for a trigger signal.
A CRC error-correction problem occurred while
reading the settings.
This function has not been enabled yet in this
version.
The camera does not contain any calibration data.
The system is waiting for the kernel driver to
respond.
The camera model used here does not support this
function or setting.
The function is not possible as trigger is disabled.
The dialog was canceled without a selection so that
no file could be saved.
An internal structure has an incorrect size.
The image memory has an inappropriate size to
store the image in the desired format.
This setting is not available for the currently set
pixel clock frequency.
This setting is not available for the currently set
exposure time.
This setting cannot be changed while automatic
exposure time control is enabled.
The BackBuffer surface cannot be created.
The BackBuffer mix surface cannot be created.
The BackBuffer overlay memory cannot be locked.
The BackBuffer overlay memory cannot be created.
Not supported in BackBuffer Overlay mode.
Back buffer surface invalid.
Back buffer surface not found.
Error releasing the overlay device context.
The back buffer timer could not be created.
The back buffer overlay was not enabled.
Only possible in BackBuffer mode.
Invalid color format
Mono binning/mono sub-sampling do not support
automatic white balance.
4 Programming (SDK)
455