Is_Exitcamera - THORLABS DCU223x Operation Manual And Sdk

4.3.23 is_ExitCamera

USB 2.0
USB 3.0
Syntax
INT is_ExitCamera (HIDS hCam)
Description
is_ExitCamera() disables the hCam camera handle and releases the data structures and memory areas taken
up by the DCx camera. Image memory allocated using the
been released yet is automatically released.
Note
We recommend that you call the following functions only from a single thread in order to avoid unpredictable
behaviour of the application.
is_InitCamera()
is_SetDisplayMode()
is_ExitCamera()
See also Programming: Thread programming
Input parameters
hCam
Return values
IS_CANT_OPEN_REGISTRY
IS_CANT_READ_REGISTRY
IS_ERROR_CPU_IDLE_STATES_CONFIGURATION
IS_INVALID_CAMERA_HANDLE
IS_INVALID_PARAMETER
IS_IO_REQUEST_FAILED
IS_NO_IMAGE_MEM_ALLOCATED
IS_NO_SUCCESS
IS_SUCCESS
Related functions
is_InitCamera()
is_EnableAutoExit()
© 2013 Thorlabs GmbH
USB 2.0
USB 3.0
273
322
213
453
273
208
is_AllocImageMem()
Camera handle
Error opening a Windows registry key
Error reading settings from the Windows registry
The configuration of the CPU idle has failed.
Invalid camera handle
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
The driver could not allocate memory.
General error message
Function executed successfully
4 Programming (SDK)
function which has not
157
213