THORLABS DCU223x Operation Manual And Sdk page 309

hCam
IS_GET_AUTO_WB_OFFSET
IS_SET_AUTO_WB_GAIN_RANGE
IS_GET_AUTO_WB_GAIN_RANGE
IS_SET_AUTO_WB_ONCE
IS_GET_AUTO_WB_ONCE
Speed and hysteresis
IS_SET_AUTO_WB_SPEED
IS_GET_AUTO_WB_SPEED
IS_SET_AUTO_WB_HYSTERESIS
IS_GET_AUTO_WB_HYSTERESIS
IS_GET_AUTO_WB_HYSTERESIS_RANGE
IS_SET_AUTO_WB_SKIPFRAMES
IS_GET_AUTO_WB_SKIPFRAMES
IS_GET_AUTO_WB_SKIPFRAMES_RANGE
© 2013 Thorlabs GmbH
Camera handle
Control parameters
pval1: defines the red level offset (-50...50)
pval2: defines the blue level offset (-50...50)
Returns the offset values for the red and blue channels.
Control parameters
pval1: returns the red level offset (-50...50)
pval2: returns the blue level offset (-50...50)
Sets the color gain limits for auto white balance.
Control parameters
pval1: sets the lowest gain value
pval2: sets the highest gain value
Returns the color gain limits for auto white balance.
Control parameters
pval1: returns the minimum permitted gain value
pval2: returns the maximum permitted gain value
Sets automatic disabling of auto white balance
Control parameters
pval1 = 1 enables control, 0 disables control
Returns the automatic disable status
Control parameters
pval1: returns the current setting
Sets the speed for auto white balance.
Control parameters
pval1: defines the control speed (0...100)
Returns the speed for auto white balance.
Control parameters
pval1: returns the current setting
Sets the hysteresis value for auto white balance.
Control parameters
pval1: defines the hysteresis value (default: 2)
Returns the hysteresis value for auto white balance.
Control parameters
pval1: returns the current setting
Returns the permissible range for the hysteresis value.
Control parameters
pval1: returns the minimum permitted value
pval2: returns the maximum permitted value
Sets the number of frames to be skipped during
automatic control.
Control parameters
pval1: defines the number (default: 4)
Returns the number of frames to be skipped during
automatic control.
Control parameters
pval1: returns the current setting
Returns the permissible range for the number of frames
to be skipped.
Control parameters
4 Programming (SDK)
*2
*2
307