THORLABS DCU223x Operation Manual And Sdk page 263

hCam
IS_HOTPIXEL_GET_SOFTWARE_USER_LIST_EXIS
TS
IS_HOTPIXEL_GET_SOFTWARE_USER_LIST_NUMB
ER
IS_HOTPIXEL_GET_SOFTWARE_USER_LIST
IS_HOTPIXEL_SET_SOFTWARE_USER_LIST
IS_HOTPIXEL_SAVE_SOFTWARE_USER_LIST
IS_HOTPIXEL_SAVE_SOFTWARE_USER_LIST_UNI
CODE
IS_HOTPIXEL_LOAD_SOFTWARE_USER_LIST
IS_HOTPIXEL_LOAD_SOFTWARE_USER_LIST_UNI
CODE
IS_HOTPIXEL_GET_CAMERA_FACTORY_LIST_EXI
STS
IS_HOTPIXEL_GET_CAMERA_FACTORY_LIST_NUM
BER
IS_HOTPIXEL_GET_CAMERA_FACTORY_LIST
IS_HOTPIXEL_GET_CAMERA_USER_LIST_EXISTS Indicates whether the user-defined hot pixel list exists in
IS_HOTPIXEL_GET_CAMERA_USER_LIST_NUMBER Returns the number of hot pixels in the user-defined hot
IS_HOTPIXEL_GET_CAMERA_USER_LIST
IS_HOTPIXEL_SET_CAMERA_USER_LIST
IS_HOTPIXEL_DELETE_CAMERA_USER_LIST
IS_HOTPIXEL_GET_CAMERA_USER_LIST_MAX_NU
MBER
IS_HOTPIXEL_GET_MERGED_CAMERA_LIST_NUMB
ER
IS_HOTPIXEL_GET_MERGED_CAMERA_LIST
pParam
nSizeOfParam
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
IS_CANT_OPEN_DEVICE
IS_INVALID_CAMERA_TYPE
© 2013 Thorlabs GmbH
Camera handle
IS_HOTPIXEL_ENABLE_SOFTWARE_USER_CORRECTI
ON: Hot pixel correction is possible via the user-defined
hot pixel list.
IS_HOTPIXEL_ENABLE_SENSOR_CORRECTION: Hot
pixel correction is possible via the sensor-internal hot
pixel correction.
Indicates whether the user-defined hot pixel list exists in
the computer (Example 3
Returns the number of hot pixels in the user-defined hot
pixel list stored in the computer.
Returns the user-defined hot pixel list stored in the
computer.
Sets the user-defined hot pixel list that is stored in the
computer.
Saves the user-defined hot pixel list to a file. The function
can also be used with Unicode file names.
Loads the user-defined hot pixel list from a file. The
function can also be used with Unicode file names.
Indicates whether the factory-set hot pixel list exists.
Returns the number of hot pixels in the factory-set hot
pixel list.
Returns the factory-set hot pixel list.
the camera EEPROM.
pixel list stored in the camera EEPROM.
Returns the user-defined hot pixel list stored in the
camera EEPROM.
Sets the user-defined hot pixel list stored in the camera
EEPROM (Example 5
263
Deletes the user-defined hot pixel list from the camera
EEPROM.
Returns the maximum number of hot pixels that the user
can store in the camera EEPROM.
Returns the number of hot pixels in a merged list that
combines the entries from the factory-set hot pixel list with
those of the user-defined hot pixels list stored in the
camera EEPROM.
Returns the merged list
Pointer to a function parameter, whose function depends
on nCommand.
Size (in bytes) of the memory area to which pParam
refers.
Communication with the driver failed because no driver
has been loaded.
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
The camera type defined in the .ini file does not match
4 Programming (SDK)
)
262
(Example 4
)
(Example 6 )
263
)
263
261