DCx Cameras
y
0...yMax
0...yMax
| IS_SET_IMAGE_POS_Y_ABS
0
Return values
IS_SUCCESS
IS_NO_SUCCESS
IS_INVALID_PARAMETER
When used with
IS_GET_IMAGE_POS parameters
IS_INVALID_MODE
Related functions
is_AOI()
159
is_ImageFormat()
436
267
Sets the vertical position
Applies the absolute position to the memory as well.
When returning settings via parameter x (s. above)
Function executed successfully
General error message
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
Current setting
Camera is in standby mode, function not allowed
© 2013 Thorlabs GmbH