Is_Setimagesize - THORLABS DCU223x Operation Manual And Sdk

DCx Cameras

4.5.41 is_SetImageSize

USB 2.0
Syntax
INT is_SetImageSize (HIDS hCam, INT x, INT y)
Description
Attention
This function is obsolete and should not be used anymore. We recommend to use the
instead (see also Obsolete functions
In conjunction with the
captured area of interest (AOI).
To avoid a positional mismatch between the display area and the image area, make sure to call the functions in the
correct order. Starting from the original image, it is mandatory to keep to the following order:
1.is_SetImageSize()
2.is_SetImagePos()
Hint
combines both functions. With is_SetAOI(), you can set the position and size of an area of
is_SetAOI()
414
interest using a single function call.
Note
Changes to the image geometry or pixel clock affect the value ranges of the frame rate and exposure time. After
executing is_SetImageSize(), calling the following functions is recommended in order to keep the defined
camera settings:
is_SetFrameRate()
is_Exposure()
216
If you are using the DCx Camera's flash function:
Input parameters
hCam
x
1...xMax
IS_GET_IMAGE_SIZE_X
IS_GET_IMAGE_SIZE_X_MIN
IS_GET_IMAGE_SIZE_X_MAX
IS_GET_IMAGE_SIZE_X_INC
IS_GET_IMAGE_SIZE_Y
IS_GET_IMAGE_SIZE_Y_MIN
IS_GET_IMAGE_SIZE_Y_MAX
IS_GET_IMAGE_SIZE_Y_INC
y
1...yMax
0
438
USB 2.0
).
379
is_SetImagePos()
435
435
329
settings, is_SetImageSize() determines the size of the
is_IO()
280
Camera handle
Sets the image width
Returns the current image width.
Returns the minimum AOI image width.
Returns the maximum AOI image width.
Returns the increment for the AOI image width.
Returns the current image height.
Returns the minimum AOI image height
Returns the maximum AOI image height
Returns the increment for the AOI image height
Sets the image height
Return settings
function
is_AOI()
159
© 2013 Thorlabs GmbH