Is_Resettodefault - THORLABS DCU223x Operation Manual And Sdk

4.3.72 is_ResetToDefault

USB 2.0
USB 3.0
Syntax
INT is_ResetToDefault (HIDS hCam)
Description
is_ResetToDefault() resets all parameters to the camera-specific defaults as specified by the driver. By
default, the camera uses full resolution, a medium speed and color level gain values adapted to daylight exposure.
Input parameters
hCam
Return values
IS_CANT_ADD_TO_SEQUENCE
IS_CANT_COMMUNICATE_WITH_DRIVER
IS_CANT_OPEN_DEVICE
IS_DR_CANNOT_CREATE_SURFACE
IS_DR_CANNOT_CREATE_TEXTURE
IS_DR_CANNOT_CREATE_VERTEX_BUFFER
IS_DR_DEVICE_OUT_OF_MEMORY
IS_DR_LIBRARY_NOT_FOUND
IS_INVALID_CAMERA_TYPE
IS_INVALID_CAPTURE_MODE
IS_INVALID_CAMERA_HANDLE
IS_INVALID_MEMORY_POINTER
IS_INVALID_PARAMETER
IS_IO_REQUEST_FAILED
IS_NO_SUCCESS
IS_NOT_CALIBRATED
IS_NOT_SUPPORTED
IS_NULL_POINTER
IS_OUT_OF_MEMORY
IS_SEQUENCE_BUF_ALREADY_LOCKED
IS_SUCCESS
IS_TIMED_OUT
© 2013 Thorlabs GmbH
USB 2.0
USB 3.0
Camera handle
The image memory is already included in the sequence
and cannot be added again.
Communication with the driver failed because no driver
has been loaded.
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
The image surface or overlay surface could not be
created.
The texture could not be created.
The vertex buffer could not be created.
Not enough graphics memory available.
The DirectRenderer library could not be found.
The camera type defined in the .ini file does not match
the current camera model.
The function can not be executed in the current camera
operating mode (free run, trigger or standby).
Invalid camera handle
Invalid pointer or invalid memory ID
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
General error message
The camera does not contain any calibration data.
The camera model used here does not support this
function or setting.
Invalid array
No memory could be allocated.
The memory could not be locked. The pointer to the
buffer is invalid.
Function executed successfully
A timeout occurred. An image capturing process could
not be terminated within the allowable period.
4 Programming (SDK)
299