Is_Setsaturation - THORLABS DCU223x Operation Manual And Sdk

DCx Cameras

4.3.92 is_SetSaturation

USB 2.0
USB 3.0
Syntax
INT is_SetSaturation (HIDS hCam, INT ChromU, INT ChromV)
Description
Using is_SetSaturation(), you can set the software color saturation.
Note
In the YUV format, color information (i.e. the color difference signals) is provided by the U and V channels. In the U
channel, this information results from the difference between the blue level and Y (luminance), in the V channel
from the difference between the red level and Y.
For use in other color formats than YUV, U and V are converted using a driver matrix.
Input parameters
hCam
ChromU
IS_GET_SATURATION_U
ChromV
IS_GET_SATURATION_V
Return values
When used with
IS_GET_SATURATION_U
IS_GET_SATURATION_V
IS_INVALID_CAMERA_HANDLE
IS_INVALID_PARAMETER
IS_NO_SUCCESS
IS_SUCCESS
Related functions
is_SetColorMode()
is_SetColorCorrection()
is_SetColorConverter()
342
USB 2.0
USB 3.0
319
317
315
Camera handle
U saturation: value multiplied by 100.
Range: [IS_MIN_SATURATION ...
IS_MAX_SATURATION]
Returns the current value for the U saturation.
V saturation: value multiplied by 100.
Range: [IS_MIN_SATURATION ...
IS_MAX_SATURATION]
Returns the current value for the V saturation.
Current setting
Invalid camera handle
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
General error message
Function executed successfully
© 2013 Thorlabs GmbH