THORLABS DCU223x Operation Manual And Sdk page 507

Parameter
[Multi AOI]
Enabled
Mode
x1...x4, y1...y4
[Shutter]
Mode
Linscan number
[Log Mode]
Mode
Manual value
Manual gain
[Timing]
Pixelclock
Framerate
Exposure
Long exposure
[Selected Converter]
IS_SET_CM_RGB32
IS_SET_CM_RGB24
IS_SET_CM_RGB16
IS_SET_CM_RGB15
IS_SET_CM_Y8
IS_SET_CM_RGB8
IS_SET_CM_BAYER
IS_SET_CM_UYVY
© 2013 Thorlabs GmbH
Description
Activate/deactivate multi AOI
Mode of multi AOI
Currently only
IS_AOI_MULTI_MODE_AXES
is supported
Axis for multi AOI mode
Shutter mode
Line which is used in the
linescan mode. The maximum
possible line number depends
on the height of the selected
AOI.
Log mode (only supported by
DCC1240x / DCC3240x
models)
Log mode value
Log mode gain
Timing parameter settings
Current pixel clock of the
camera
Current frame rate
Current exposure time
Activates long exposure
If the long exposure is active,
then the range of exposure
changes.
Sets the type of Bayer conversion for the specified color format when using color
cameras (see
is_SetColorConverter()
formats, see the Color and memory formats
Color format
Color format
Color format
Color format
Color format
Color format
Color format
Color format
Value range
0 = Multi AOI off
1 = Multi AOI on
Sensor-dependent (only
supported by DCC1240x /
DCC3240x models)
1 = Rolling shutter
2 = Global shutter
4 = Fast linescan
64 = Rolling shutter with global
start
128 = Global shutter (alternative
timing)
Sensor-dependent (only
supported by DCC1240x /
DCC3240x models)
0 = Factory-default with anti-
blooming
1 = Off (no anti-blooming)
2 = Manual Log mode
Only in combination with manual
Log mode
*1
Sensor-dependent
Depends on Pixelclock and
image geometry
Depends on Framerate
Not supported by DCx cameras 0
). For a description of all color
315
section.
502
0, 1, 2, 4
0, 1, 2, 4
0, 1, 2, 4
0, 1, 2, 4
0, 1, 2, 4
0, 1, 2, 4
0, 1, 2, 4
0, 1, 2, 4
6 Appendix
Example
0
1
512
0
103
15.104458
0.334059
2
2
2
2
2
2
8
2
505