Is_Settriggercounter - THORLABS DCU223x Operation Manual And Sdk

4.3.97 is_SetTriggerCounter

USB 2.0
Syntax
INT is_SetTriggerCounter (HIDS hCam, INT nValue)
Description
is_SetTriggerCounter() returns the number of images captured in hardware or software trigger mode.
Note
In freerun mode, the counter always returns 0 even when images were captured.
Input parameters
hCam
nValue
IS_GET_TRIGGER_COUNTER
Other values
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
IS_CANT_OPEN_DEVICE
IS_INVALID_CAMERA_HANDLE
IS_INVALID_PARAMETER
IS_IO_REQUEST_FAILED
IS_NO_SUCCESS
IS_SUCCESS
Related functions
is_SetExternalTrigger()
is_CameraStatus()
© 2013 Thorlabs GmbH
USB 2.0
Camera handle
327
172
Returns the current count for triggered image captures
Resets the counter for triggered image captures
Communication with the driver failed because no driver
has been loaded.
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
Invalid camera handle
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
General error message
Function executed successfully
4 Programming (SDK)
351