Is_Setbadpixelcorrection - THORLABS DCU223x Operation Manual And Sdk

4.5.28 is_SetBadPixelCorrection

USB 2.0
Syntax
INT is_SetBadPixelCorrection (HIDS hCam, INT nEnable, INT threshold)
Description
Attention
This function is obsolete and should not be used anymore. We recommend to use the
function instead (see also
is_SetBadPixelCorrection() enables/disables the software correction of sensor hot pixels.
Attention
This correction will not work while sub-sampling or binning are enabled or raw Bayer mode is used.
Input parameters
hCam
nEnable
IS_BPC_DISABLE
IS_BPC_ENABLE_SOFTWARE
IS_BPC_ENABLE_USER
IS_GET_BPC_MODE
IS_GET_BPC_THRESHOLD
threshold
Return values
IS_SUCCESS
IS_NO_SUCCESS
When used with
IS_GET_BPC_MODE
When used with
IS_GET_BPC_THRESHOLD
Related functions
is_LoadBadPixelCorrectionTable()
is_SaveBadPixelCorrectionTable()
is_SetBadPixelCorrectionTable()
© 2013 Thorlabs GmbH
USB 2.0
Obsolete functions ).
379
394
405
418
Camera handle
Disables the correction function.
Enables software correction based on the hot pixel list
stored in the EEPROM.
Enables software correction based on user-defined
values. First, the
is_SetBadPixelCorrectionTable
function must be called.
()
418
Returns the current mode.
Returns the current threshold value.
Currently not used
Function executed successfully
General error message
Current mode
Current threshold value
4 Programming (SDK)
is_HotPixel()
417
260