Definition Of Ip Protection Classes; History Of Uc480 Software Versions - THORLABS DCU223x Operation Manual And Sdk

Parameter
Flash delay
Flash duration
PWM mode
PWM frequency
PWM duytcycle
GPIO state
GPIO direction
[Sequence AOI]
NumberUsedAOI
StartX1...StartX3
StartY1...StartY3
Gain1...Gain3
Exposure1...Exposure3
ReadoutCycle1...
ReadoutCycle3
BinningMode1...
BinningMode3
SubsamplingMode1...
SubsamplingMode3
ScalerFactor1...
ScalerFactor3
DetachImageParameter1...
DetachImageParameter3
[Transfer]
ImageDelay_us
PacketInterval_us
1
* This information is provided in
2
* For the parameters, please refer to the uc480.h header file provided in the \Develop\include folder of the uc480
installation directory (see also
3
* Function obsolete, see chapter

6.5 Definition of IP Protection Classes

The housing of the DCx Cameras comply with IP 30:
Protection against the ingression of small particles (diameter > 2.5 mm)
No protection against water

6.6 History of uc480 Software Versions

For new features in the current driver version 4.20see
New in Version 4.02
Cameras & functions
The USB 3 DCC3240x cameras are now supported under Windows
© 2013 Thorlabs GmbH
Description
Delay of the flash signal in µs
Duration of the flash signal in µs Depends on sensor setting, can
PWM mode
Frequency of the pulse-width
modulation
Duty cycle of the pulse-width
modulation
State of the GPIO
Direction of the GPIO
The sequence AOI is supported by DCC1240x / DCC3240x models only.
Number of used AOIs
X position of AOI 1-3
Y position of AOI 1-3
Gain of AOI 1-3
Exposure of AOI 1-3
Number of read-out cycles of
AOI 1-3
Binning mode of AOI 1-3
Subsampling mode of AOI 1-3
Scaling factor of AOI 1-3
Changes of exposure time and
gain are transferred to AOI 1-3
Not supported by DCx cameras
Camera and sensor data
Programming notes ).
451
Obsolete functions
379
Value range
Depends on sensor setting, can
be queried using
be queried using
see
is_IO()
0.0...1.0 (1.0 corresponds to
100 %)
see
is_IO()
see
is_IO()
see
is_AOI()
0 = Every change is transferred
1 = Changes are not transferred
see also
is_AOI()
chapter.
460
.
What is New in this Version?
Described in chapter
6 Appendix
Example
0
is_IO()
280
200
is_IO()
280
280
280
280
159
159
.
16
509