Image Pre-Processing; Get Camera Status; Using The Camera Eeprom - THORLABS DCU223x Operation Manual And Sdk

DCx Cameras

4.2.4.3 Image Pre-processing

Bayer conversion
The following functions enable and adjust the Bayer conversion (see
is_Convert()
188
is_GetColorConverter()
is_SetBayerConversion()
420
is_SetColorConverter()
Lookup table
Using lookup table (LUT) functions, you can e. g. adjust brightness or contrast after the acquisition.
is_GetCameraLUT()
is_GetImageHistogram()

4.2.4.4 Get Camera Status

Using these functions, you can read out additional useful information on the camera status.
is_CameraStatus()
is_GetAutoInfo()
227
is_GetCameraList()
is_GetCameraType()
is_CaptureStatus()
is_GetError()
239
is_GetUsedbandwidth()
is_GetVsyncCount()
is_SetErrorReport()

4.2.4.5 Using the Camera EEPROM

The non-volatile EEPROM of every DCx camera can hold user data or camera settings.
is_GetCameraInfo()
is_GetSensorInfo()
is_ReadEEPROM()
296
is_WriteEEPROM()
358
148
Converts a Bayer raw image into the desired output format
Returns the currently set Bayer conversion mode
236
Sets the algorithm for Bayer conversion
Sets the algorithm for Bayer conversion in the camera (not applicable for DCx
315
Cameras)
Read out current hardware LUT
235
Computes a histogram for the image buffer passed to the function
242
Returns the event counters and other information.
172
Enables standby mode.
Returns status information on the auto features.
Returns information on all connected cameras.
233
Returns the camera type.
385
Displays information on errors that have occurred.
174
Displays errors that have occurred.
Returns the bus bandwidth (in Mbyte/s) currently used by all
257
initialized or selected cameras.
Returns the VSYNC counter. It will be incremented by 1 each time
258
the sensor starts capturing an image.
Enables/disables dialog messages for error output.
326
Returns the factory-set information (e.g. revision information for the
231
individual DCxCamera components).
Returns the sensor information.
251
Reads out the writable data area of the EEPROM.
Writes user data to the EEPROM.
Color filter (Bayer filter)
© 2013 Thorlabs GmbH
).
26