Is_Settriggerdelay - THORLABS DCU223x Operation Manual And Sdk

DCx Cameras

4.3.98 is_SetTriggerDelay

USB 2.0
USB 3.0
Syntax
INT is_SetTriggerDelay (HIDS hCam, INT nTriggerDelay)
Description
Using is_SetTriggerDelay(), you can set the delay time between the arrival of a trigger signal and the start of
exposure. The trigger signal can be initiated by hardware or by software.
The delay time set here adds to the delay caused by the sensor. The delay times of each sensor are listed in
Camera and sensor data
Input parameters
hCam
nTriggerDelay
IS_GET_TRIGGER_DELAY
IS_GET_MIN_TRIGGER_DELAY
IS_GET_MAX_TRIGGER_DELAY
IS_GET_TRIGGER_DELAY_GRANULARITY
Return values
When used with
IS_GET_TRIGGER_DELAY
IS_CANT_COMMUNICATE_WITH_DRIVER
IS_CANT_OPEN_DEVICE
IS_INVALID_CAMERA_HANDLE
IS_INVALID_PARAMETER
IS_IO_REQUEST_FAILED
IS_NO_SUCCESS
IS_SUCCESS
Related functions
is_IO()
280
is_SetExternalTrigger()
352
USB 2.0
USB 3.0
chapter.
460
327
Camera handle
Time by which the image capture is delayed (in µs)
0 = deactivate trigger delay
Returns the currently set delay time.
Returns the minimum adjustable value.
Returns the maximum adjustable value.
Returns the resolution of the adjustable delay time.
Current setting
Communication with the driver failed because no driver
has been loaded.
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
Invalid camera handle
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
General error message
Function executed successfully
© 2013 Thorlabs GmbH