THORLABS DCU223x Operation Manual And Sdk page 515

Cameras & functions
On UI-1008XS (uEye XS) model: Choose the HS mode for
triggered image capture
Predefined image formats can now be set for all CMOS cameras
New uc480 Hotpixel Editor for editing the hotpixel list stored in the
camera
The I2C outputs on some uEye models can now be programmed
directly in the uc480 Viewer.
The uc480 Viewer can now display and save images with a bit
depth of more than 8 bit.
Information in this manual
The application notes for the individual camera models are now
provided in a separate chapter.
The is_AOI() function comprises all the functions for setting and
positioning an AOI. The following uc480 API commands are
therefore obsolete and have been moved to the Obsolete Functions
chapter:
is_SetAOI()
is_SetImageAOI()
is_SetImageSize()
is_SetImagePos()
is_AOI() also allows quickly moving an AOI to a different position.
New in Version 3.70
Cameras & functions
New API function for setting the color space and color
temperature
New function parameters for reading out the exposure time range
Information in this manual
Updated camera specifications
Schematic timing diagrams for using the flash in hardware trigger
mode
New in Version 3.60
Functions
New function in uc480 Viewer for selection profiles for camera
settings
Information in this manual
Function is_GetCameraType() moved to the "Obsolete
Functions" section. It is entirely replaced by is_GetCameraInfo
().
© 2013 Thorlabs GmbH
Described in chapter
is_ImageFormat()
267
uc480 Hotpixel Editor
123
uc480 Viewer: Miscellaneous
uc480 Viewer: Format
99
Described in chapter
Application notes for the cameras
Obsolete Functions
379
is_AOI()
159
Described in chapter
is_ColorTemperature()
is_SetExposureTime()
Described in chapter
DCC1240x
461
Digital In-/Output (Trigger/Flash)
Described in chapter
Start Dialog
76
Creating Profiles
117
Described in chapter
Obsolete Functions
379
is_GetCameraInfo()
6 Appendix
110
63
180
427
47
231
513