THORLABS DCU223x Operation Manual And Sdk page 458

DCx Cameras
No Error
IS_INVALID_I2C_DEVICE_ADDRESS
176
177 IS_COULD_NOT_CONVERT
178 IS_TRANSFER_ERROR
IS_PARAMETER_SET_NOT_PRESENT
179
IS_INVALID_CAMERA_TYPE
180
181 IS_INVALID_HOST_IP_HIBYTE
182 IS_CM_NOT_SUPP_IN_CURR_DISPLAYMODE
183 IS_NO_IR_FILTER
IS_STARTER_FW_UPLOAD_NEEDED
184
185 IS_DR_LIBRARY_NOT_FOUND
186 IS_DR_DEVICE_OUT_OF_MEMORY
187 IS_DR_CANNOT_CREATE_SURFACE
IS_DR_CANNOT_CREATE_VERTEX_BUFFER
188
189 IS_DR_CANNOT_CREATE_TEXTURE
190 IS_DR_CANNOT_LOCK_OVERLAY_SURFACE
191 IS_DR_CANNOT_UNLOCK_OVERLAY_SURFACE
IS_DR_CANNOT_GET_OVERLAY_DC
192
193 IS_DR_CANNOT_RELEASE_OVERLAY_DC
194 IS_DR_DEVICE_CAPS_INSUFFICIENT
195 IS_INCOMPATIBLE_SETTING
IS_DR_NOT_ALLOWED_WHILE_DC_IS_ACTIVE
196
IS_DEVICE_ALREADY_PAIRED
197
198 IS_SUBNETMASK_MISMATCH
199 IS_SUBNET_MISMATCH
200 IS_INVALID_IP_CONFIGURATION
IS_DEVICE_NOT_COMPATIBLE
201
202 IS_NETWORK_FRAME_SIZE_INCOMPATIBLE
203 IS_NETWORK_CONFIGURATION_INVALID
204 IS_ERROR_CPU_IDLE_STATES_CONFIGURATION The configuration of the CPU idle has failed.
IS_DEVICE_BUSY
205
456
Description
2
Invalid I C device address
The current image could not be processed.
Transfer error. Frequent transfer errors can mostly
be avoided by reducing the pixel rate.
Parameter set is not present.
The camera type defined in the .ini file does not
match the current camera model.
Invalid HIBYTE of host address
The color mode is not supported in the current
display mode.
No IR filter available
The camera's starter firmware is not compatible
with the driver and needs to be updated.
The DirectRenderer library could not be found.
Not enough graphics memory available.
The image surface or overlay surface could not be
created.
The vertex buffer could not be created.
The texture could not be created.
The overlay surface could not be locked.
The overlay surface could not be unlocked.
Could not get the device context handle for the
overlay.
Could not release the device context handle for the
overlay.
Function is not supported by the graphics hardware.
Because of other incompatible settings the function
is not possible.
A device context handle is still open in the
application.
The device is already paired.
The subnet mask of the camera and PC network
card are different.
The subnet of the camera and PC network card are
different.
The configuration of the IP address is invalid.
The device is not compatible to the drivers.
The settings for the image size of the camera are
not compatible to the PC network card.
The configuration of the network card is invalid.
The camera is busy ad cannot transfer the
requested image.
© 2013 Thorlabs GmbH