THORLABS DCU223x Operation Manual And Sdk page 231

AG_PM_SENS_CENTER_SPOT
AG_PM_SENS_PORTRAIT
AG_PM_SENS_LANDSCAPE
Status Flags in UC480_AUTO_INFO::AAntiFlickerCaps
ANTIFLCK_MODE_OFF
ANTIFLCK_MODE_SENS_AUTO
ANTIFLCK_MODE_SENS_50_FIXED
ANTIFLCK_MODE_SENS_60_FIXED
Status Flags in UC480_AUTO_INFO::SensorWBModeCaps
WB_MODE_DISABLE
WB_MODE_AUTO
WB_MODE_ALL_PULLIN
WB_MODE_INCANDESCENT_LAMP
WB_MODE_FLUORESCENT_DL
WB_MODE_OUTDOOR_CLEAR_SKY
WB_MODE_OUTDOOR_CLOUDY
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
IS_CANT_OPEN_DEVICE
IS_INVALID_CAMERA_HANDLE
IS_INVALID_PARAMETER
IS_IO_REQUEST_FAILED
IS_NO_SUCCESS
IS_NOT_SUPPORTED
IS_SUCCESS
Related functions
is_SetAutoParameter()
© 2013 Thorlabs GmbH
303
Only a small area in the image center is used for
metering.
Metering is based on that part of the field of view that
corresponds to the portrait format.
Metering is based on that part of the field of view that
corresponds to the landscape format.
Anti flicker function disabled.
The anti flicker mode is selected automatically (50 or
60 Hz).
The anti flicker mode is set to a fixed value of 50 Hz.
The anti flicker mode is set to a fixed value of 60 Hz.
Disables the sensor's auto white balance
Sensor automatically determines auto white balance
Sensor automatically determines auto white balance
using the Gray World algorithm. This algorithm assumes
that the average color value in the scene is gray.
Sensor sets auto white balance to incandescent light
Sensor sets auto white balance to fluorescent light
(daylight type)
Sensor sets auto white balance to direct daylight
Sensor sets auto white balance to cloudy sky
Communication with the driver failed because no driver
has been loaded.
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
Invalid camera handle
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
General error message
The camera model used here does not support this
function or setting.
Function executed successfully
4 Programming (SDK)
229