Is_Gettestimagevaluerange - THORLABS DCU223x Operation Manual And Sdk

4.3.52 is_GetTestImageValueRange

USB 2.0
USB 3.0
Syntax
INT is_GetTestImageValueRange (HIDS hCam,
Description
Using is_GetTestImageValueRange(), you can query the value range of the additional parameter required for
some camera test images. You can enable the sensor test image feature using
Input parameters
hCam
TestImage
TestImageValueMin
TestImageValueMax
Return values
IS_INVALID_CAMERA_HANDLE
IS_NO_SUCCESS
IS_NOT_SUPPORTED
IS_SUCCESS
Related functions
is_GetSupportedTestImages()
is_SetSensorTestImage()
© 2013 Thorlabs GmbH
USB 2.0
USB 3.0
INT TestImage,
INT* TestImageValueMin,
INT* TestImageValueMax)
253
345
is_SetSensorTestImage()
Camera handle
Test image for which the value range is queried
Minimum value
Maximum value
Invalid camera handle
General error message
The camera model used here does not support this
function or setting.
In this case, the TestImageValueMin and
TestImageValueMax parameters are equal to 0.
Function executed successfully
4 Programming (SDK)
345
255
.