THORLABS DCU223x Operation Manual And Sdk page 83

Line view (horizontal)
Line view (vertical)
Histogram
Zoom window
Pixel peek window
Waterfall window
Log window
Image infos
3.4.2.5.4 uc480
The "uc480" menu contains functions for image capture and camera configuration.
Initialize
Initialize and stop
Standby
Close
Reset to defaults
Start live video
Snapshot
Sync Trigger (Rising Edge)
Sync Trigger (Falling Edge)
Single trigger
Continuous trigger
Properties ...
Auto contrast
Set new AES/AGC AOI
Clear AES/AGC AOI
Auto whitebalance
Set new AWB AOI
Clear AWB AOI
Sharpness measure AOI
Set new AOI
Clear AOI
User allocated image
Sound on transfer failed
Error report
Clear counters
© 2013 Thorlabs GmbH
Opens the Line view
86
Opens the Line view
86
Opens the Histogram
86
Opens the Zoom window
87
Opens the Pixel peek
88
Opens the Waterfall
88
Opens the Log window
Opens the Image infos
Open camera and show live image
79
Open camera
The camera changes to standby mode
Close camera
Resets all values set in the demo program to the defaults
Live video on/off
Snapshot from live video
Starts capture in freerun synchronization mode
trigger signal.
The freerun synchronization mode is currently not supported by DCx camera
models.
Triggered snapshot (software trigger)
Continuous triggered capture on/off
Trigger source hardware/software can be set in the corresponding
page
103
Opens the camera properties dialog
Activate automatic brightness control
Define active area for automatic brightness control
Clear active area defined for automatic brightness control
Activate automatic white balance
Define active area for automatic white balance
Clear active area defined for automatic white balance
Draw an AOI and measure sharpness within the AOI
After calling "Set new AOI", you can select an
mouse
Clears the area of interest (reset to full frame)
The memory is allocated not via the SDK function
is_SetAllocatedImageMem()
Output an acoustic signal if a transmission error occurs
Errors are displayed in a dialog box
Reset the counters (see
window (row view)
window (column view)
window
window
window
89
window
90
92
106
108
area of interest
, but by the application
301
uc480 Viewer status bar)
3 Operation
on the specified edge of the
20
property
with the
97
79
81