Is_Setbadpixelcorrectiontable - THORLABS DCU223x Operation Manual And Sdk

DCx Cameras

4.5.29 is_SetBadPixelCorrectionTable

USB 2.0
Syntax
INT is_SetBadPixelCorrectionTable (HIDS hCam, INT nMode, WORD* pList)
Description
Attention
This function is obsolete and should not be used anymore. We recommend to use the
function instead (see also
is_SetBadPixelCorrectionTable() can be used to set the table containing the hot pixel positions which will
be used by the user-defined hot pixel correction function. You can enable hot pixel correction by calling
is_SetBadPixelCorrection()
indicates the number of pixel coordinates in the table, the coordinates are listed subsequently (first X, then Y).
A table with 3 hot pixels must be structured as follows:
3 X1
Input parameters
hCam
nMode
IS_SET_BADPIXEL_LIST
IS_GET_LIST_SIZE
IS_GET_BADPIXEL_LIST
pList
Return values
IS_SUCCESS
IS_NO_SUCCESS
When used with
IS_GET_LIST_SIZE
Related functions
is_LoadBadPixelCorrectionTable()
is_SaveBadPixelCorrectionTable()
is_SetBadPixelCorrection()
418
USB 2.0
Obsolete functions ).
379
. Each value in the table consists of a 2-byte WORD data type. The first value
417
Y1 X2
394
405
417
Y2 X3
Camera handle
Sets a new user-defined list.
The pList parameter points to a list which has the
format described above.
Returns the number of pixel coordinates included in the
user-defined list.
If the list contains no coordinates, the return value is -1.
Copies the user-defined list to the pList parameter.
Make sure to allocate the memory accordingly.
Pointer to the starting address of the hot pixel table
Function executed successfully
General error message
Number of coordinates in the list
If the list contains no coordinates, the return value is -1.
is_HotPixel()
Y3
© 2013 Thorlabs GmbH
260