DCx Cameras
4.3.20 is_EnableAutoExit
USB 2.0
USB 3.0
Syntax
INT is_EnableAutoExit (HIDS hCam, INT nMode)
Description
enables automatic closing of the camera handle after a camera has been removed on-the-fly.
is_EnableAutoExit()
Upon closing of the handle, the entire memory allocated by the driver will be released.
Input parameters
hCam
nMode
IS_ENABLE_AUTO_EXIT
IS_DISABLE_AUTO_EXIT
IS_GET_AUTO_EXIT_ENABLED
Return values
Current setting when used together
withIS_GET_AUTO_EXIT_ENABLED
IS_INVALID_CAMERA_HANDLE
IS_NO_SUCCESS
IS_SUCCESS
Related functions
is_ExitCamera()
208
USB 2.0
USB 3.0
213
Camera handle
Enables automatic closing
Disables automatic closing
Returns the current setting
Invalid camera handle
General error message
Function executed successfully
© 2013 Thorlabs GmbH