THORLABS DCU223x Operation Manual And Sdk page 195

hCam
IS_DEVICE_FEATURE_CMD_GET_LOG_MODE_MANUA
L_GAIN_DEFAULT
IS_DEVICE_FEATURE_CMD_GET_LOG_MODE_MANUA
L_GAIN_RANGE
IS_DEVICE_FEATURE_CMD_GET_LOG_MODE_MANUA
L_GAIN
IS_DEVICE_FEATURE_CMD_SET_LOG_MODE_MANUA
L_GAIN
pParam
nSizeOfParam
Status Flags from DEVICE_FEATURE_MODE_CAPS
IS_DEVICE_FEATURE_CAP_SHUTTER_MODE_ROLLIN
G
IS_DEVICE_FEATURE_CAP_SHUTTER_MODE_ROLLIN
G_GLOBAL_START
IS_DEVICE_FEATURE_CAP_SHUTTER_MODE_GLOBAL Global shutter mode is supported/Set mode
IS_DEVICE_FEATURE_CAP_SHUTTER_MODE_GLOBAL
_ALTERNATIVE_TIMING
IS_DEVICE_FEATURE_CAP_LINESCAN_MODE_FAST
IS_DEVICE_FEATURE_CAP_LINESCAN_NUMBER
IS_DEVICE_FEATURE_CAP_LOG_MODE
LOG_MODES
IS_LOG_MODE_FACTORY_DEFAULT
IS_LOG_MODE_OFF
IS_LOG_MODE_MANUAL
© 2013 Thorlabs GmbH
Camera handle
Returns the default settings for the manual gain for the
Log mode (Example 6
195
Returns the range for the manual gain of the Log mode
Returns the current manual gain of the Log mode
(Example 7 )
195
Sets the manual gain of the Log mode
Pointer to a function parameter, whose function
depends on nCommand.
Size (in bytes) of the memory area to which
pParam refers.
Rolling shutter mode is supported/Set mode
Rolling shutter mode with global start is supported/Set
mode
Global shutter mode with different timing parameters is
supported/Set mode
Fast line scan mode is supported/Set mode
Line number at fast line scan mode is supported/Set
number
LinLog pixel mode is supported/Set mode
Default settings for the Log mode
Log mode off
Manual Log mode. In this case the LogMode value and
the LogMode gain are effective.
4 Programming (SDK)
)
193