THORLABS DCU223x Operation Manual And Sdk page 270

DCx Cameras
hCam
nSizeOfParam
Contents of the IMAGE_FORMAT_LIST list of image formats
UINT
UINT
UINT
IMAGE_FORMAT_INF
O
Contents of the list entry IMAGE_FORMAT_INFO
INT nFormatID
UINT nWidth
UINT nHeight
UINT nX0
UINT nY0
UINT nSupportedCaptureModes
UINT nBinningMode
UINT nSubsamplingMode
IS_CHAR strFormatName[64]
double dSensorScalerFactor
UINT nReserved[24]
Possible values for CAPTUREMODE
CAPTMODE_SINGLE
CAPTMODE_FREERUN
CAPTMODE_TRIGGER_SOFT_SINGLE
CAPTMODE_TRIGGER_SOFT_CONTINUOUS
CAPTMODE_TRIGGER_HW_SINGLE
CAPTMODE_TRIGGER_HW_CONTINUOUS
For further information on the image capture modes, see also in the Basics:
268
nSizeOfListEntry
nNumListElements
nReserved[4]
FormatInfo[0]
Camera handle
Size (in bytes) of the memory area to which pParam
refers.
Must be preset with the size of a list entry in bytes
Must be preset with the number of list entries (from
IMGFRMT_CMD_GET_NUM_ENTRIES)
Reserved
First entry in the list.
After having been filled by IMGFRMT_CMD_GET_LIST, the list
contains additional entries FormatInfo[1]...FormatInfo
[nNumListElements-1].
Format ID of the specified image format (see
formats" below)
269
Width of the area of interest
Height of the area of interest
Start point of the area of interest (X)
Start point of the area of interest (Y)
Image capture modes supported for this format (see table
below)
Binning mode used
Subsampling mode used
Description of the format
Scaling factor used (only sensors that support
Reserved
Freerun mode, single frame (freerun snap)
Freerun mode, continuous (freerun live)
Software triggered mode, single frame
Software triggered mode, continuous
Hardware triggered mode, single frame
Hardware triggered mode, continuous
table "Image
scaling
Operating modes chapter.
17
© 2013 Thorlabs GmbH
).
343