THORLABS DCU223x Operation Manual And Sdk page 164

DCx Cameras
hCam
IS_AOI_SEQUENCE_GET_ENABLE
pParam
nSizeOfParam
Contents of the IS_RECT structure
INT
INT
INT
INT
Contents of the IS_POINT_2D structure
INT
INT
Contents of the IS_SIZE_2D structure
INT
INT
Content of the AOI_SEQUENCE_PARAMS structure
INT s32AOIIndex
INT s32NumberOfCycleRepetitions
INT s32X
INT x32Y
Double dblExposure
INT s32Gain
INT s32BinningMode
INT s32SubsamplingMode
INT s32DetachImageParameters
Double dblScalerFactor
BYTE byReserved[64]
162
Camera handle
Returns the bitmask (only DCC1240x/DCC3240x camera models)
Sample 3 for sequence AOI mode
Pointer to a function parameter, whose function depends on nCommand.
Size (in bytes) of the memory area to which pParam refers.
s32X
s32Y
s32Width
s32Height
s32X
s32Y
s32Width
s32Height
166
X position of the AOI
Y position of the AOI
Width of the AOI
Height of the AOI
X position of the AOI
Y position of the AOI
Width of the AOI
Height of the AOI
Index of the AOI
Number of readout cycles
X position of the AOI
Y position of the AOI
Exposure
Gain
Binning mode (not supported in version 4.20)
Subsampling mode (not supported in version 4.20)
0 = every change of the exposure time and the master
gain is copied from AOI 1 to the additional AOIs
(default).
As a change of AOI 1 also reset the exposure time,
this change is also transferred to AOI 2, 3 and 4.
1 = a change of exposure time, gain or position of AOI
1 does not affect the parameters of AOI 2, 3 and 4.
Scaling factor (not supported in version 4.20)
Reserved
© 2013 Thorlabs GmbH