DCx Cameras
4.5.34 is_SetEdgeEnhancement
USB 2.0
Syntax
INT is_SetEdgeEnhancement (HIDS hCam, INT nEnable)
Description
Attention
This function is obsolete and should not be used anymore. We recommend to use the
function instead (see also
206
is_SetEdgeEnhancement() enables a software edge filter. Due to Bayer format color conversion, the original
edges of a color image may easily become blurred. By enabling the digital edge filter, you can optimize edge
representation. This function causes a higher CPU load.
Input parameters
hCam
nEnable
IS_EDGE_EN_DISABLE
IS_EDGE_EN_STRONG
IS_EDGE_EN_WEAK
IS_GET_EDGE_ENHANCEMENT
Return values
When used together with
IS_GET_EDGE_ENHANCEMENT
IS_INVALID_CAMERA_HANDLE
IS_INVALID_PARAMETER
IS_NO_SUCCESS
IS_SUCCESS
Related functions
is_SetColorMode()
is_SetColorConverter()
426
USB 2.0
Obsolete functions
319
315
).
379
Camera handle
Disables the edge filter.
Enables strong edge enhancement.
Enables weaker edge enhancement.
Returns the current setting.
Current setting
Invalid camera handle
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
General error message
Function executed successfully
is_EdgeEnhancement()
© 2013 Thorlabs GmbH