THORLABS DCU223x Operation Manual And Sdk page 187

hCam
pParam
cbSizeOfParam
Contents of the CONFIGURATION_CAPS Structure
INT IS_CONFIG_CPU_IDLE_STATES_CAP_SUPPORT
ED
INT IS_CONFIG_OPEN_MP_CAP_SUPPORTED
INT IS_CONFIG_INITIAL_PARAMETERSET_CAP_SU
PPORTED
Contents of the CONFIGURATION_SEL Structure
INT IS_CONFIG_CPU_IDLE_STATES_BIT_AC_VALU
E
INT IS_CONFIG_CPU_IDLE_STATES_BIT_DC_VALU
E
INT IS_CONFIG_OPEN_MP_DISABLE
INT IS_CONFIG_OPEN_MP_ENABLE
INT IS_CONFIG_INITIAL_PARAMETERSET_NONE
INT IS_CONFIG_INITIAL_PARAMETERSET_1
INT IS_CONFIG_INITIAL_PARAMETERSET_2
Return values
IS_CANT_OPEN_REGISTRY
IS_CANT_READ_REGISTRY
IS_ERROR_CPU_IDLE_STATES_CONFIGURATION
IS_INVALID_PARAMETER
IS_NO_IMAGE_MEM_ALLOCATED
IS_NO_SUCCESS
IS_NOT_SUPPORTED
IS_OPERATING_SYSTEM_NOT_SUPPORTED
IS_SUCCESS
Related functions
is_ParameterSet()
© 2013 Thorlabs GmbH
292
Camera handle
Additional information
pParam: Pointer to a UINT variable,
IS_CONFIG_INITIAL_PARAMETERSET_NONE
IS_CONFIG_INITIAL_PARAMETERSET_1
IS_CONFIG_INITIAL_PARAMETERSET_2
nSizeOfParam: 4
Example 5
187
Pointer to a function parameter, whose function depends
on nCommand.
Size (in bytes) of the memory area to which pParam
refers.
Function parameters for setting the processor
operating states are supported.
Function parameters to configure OpenMP are
supported.
Function parameters to load camera parameters
during initialization are supported.
Set/recover processor operating states for power
supply unit operation
Set/recover processor operating states for battery
operation
OpenMP support disabled
OpenMP support enabled
Load camera parameters during initialization
disabled
Load camera parameter set 1 during initialization
Load camera parameter set 2 during initialization
Error opening a Windows registry key
Error reading settings from the Windows registry
The configuration of the CPU idle has failed.
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
The driver could not allocate memory.
General error message
The camera model used here does not support this
function or setting.
Operating system not supported
Function executed successfully
4 Programming (SDK)
185