Cooling system
OIL RADIATOR ASSEMBLY
Before reassembly, check the integrity of the oil tubes
and replace if necessary.
Change the sealing rings for the oil pipe fittings every
time they are disassembled.
Grease O-rings with silicone grease.
Proceed to re-assemble the previously removed parts
following the disassembly instructions in reverse order,
10 N•m
being careful not to put the pipes in backwards, con-
fusing right with left and one end with the other.
Observe the torque pressure of the screw that clamps
the retaining plate to the oil radiator pipe.
L
When re-assembling the oil radiator pipes, keep the
return pipe clamping screw slack (1).
- 25 -