How to select the mapping of the control unit
On the F3 model is it possible to select different control
unit mappings which allow to obtain variable power
and performance characteristics based on the type of
vehicle use.
NOTE
The mapping selection may be performed
even during the use of the vehicle.
The mapping of the control unit can be selected by
pressing the start button when the engine is switched
on; this way the mapping switches to the following set-
ting value. The corresponding mapping characteristics
are listed in the following table.
Mapping
N
Normal
Rain
Mode
- Press the start button when the engine is switched on
Setting of "Custom" mapping
until selecting the mapping "C" of the control unit
("Custom" mapping).
WARNING
The "Custom" mapping setting operations
must be performed when the gear is in neu-
tral and the motorbike stationary with your
feet on the ground. Do not change the dis-
play while driving.
Maintenance
R
S
C
Sport
Customised
- 73 -
B