Quick Shift Mode - MV Agusta F3 675 Workshop Manual

- By pressing the "OK" key for more than three sec-
onds, all the previously acquired times will be can-
celled. By pressing the "SET" key for less than three
seconds, the cancellation procedure will be interrupt-
ed.
- Once all the data have been cancelled, press the
"SET" key to exit the "ALL LAPS RESET" mode and
to return to the "CHRONO" mode.
- Press "SET" in order to access to "QUICK SHIFT"
"QUICK SHIFT" mode *
of the "quick shift" function of the gear change ("ON":
mode. The display shows the current activation state
activated; "OFF": not activated).
WARNING
The display modes may be changed or set
when the engine is off, the gear in neutral,
the motorbike stationary with your feet on
the ground. Do not change the display while
driving.
- Press the "OK" button for less than three seconds;
the activation caption of the "quick shift" function
begins to flash.
- By pressing the "OK" button for less than three sec-
onds, the caption toggles from "OFF" to "ON" and
inversely.
- Press "SET" to confirm the selected "quick shift" acti-
vation state.
(*): This function is present only on certain models;
available in aftermarket on all models
Maintenance
- 71 -
B