Table of Contents
Advertisement
Using the specially designed spanner, remove nut (1)
and washer (2).
Remove the pinion and replace it with a new pinion.
For reassembly, insert the pinion to end stroke.
Take a new washer, assemble it with the nut and tight-
en to the prescribed torque pressure utilising Loctite
F
thread-locking fluid.
Torque pressure: 140 N·m
Recommended thread-locking fluid: Loctite 270
Hammer the new washer down onto the two opposite
faces of the hexagon.
Remove the chain as described on pages 54-56.
Suspension and wheels
- 78 -
140 N•m
Hide quick links:
Advertisement
Table of Contents
