Bodywork
Under-engine fairing removal
Proceed to remove the four clamping items of the right
under-fairing located respectively:
1
- two screws (1) on the top side part;
NOTE: do not remove the third screw (2) on the rear
part.
C
2
- Two screws (3) in the bottom part (1 rear and 1 front);
Repeat the operation on the corresponding clamping
3
items of the left under-fairing.
Fairing side panel removal
Remove the six fixing bolts (1) situated on the right fair-
1
ing side panel.
1
- 4 -